Wednesday, February 8, 2012

Editing For Pre-Exposure?

Greetings, volks. Welcome to Hohenfels Volks, THE place for our place! I hope everyone is warm and well, and that you got the shot you wanted today!

Today we’re going to deal with an editing technique based on old film shooting. I know this was supposed to be another Around Hohenfels, but that didn’t quite pan out the way I had planned.

Back in the film days, you couldn’t change film speed mid roll. You also had some interesting things going on. Film often had a wider latitude for exposure errors, especially for overexposure, but even underexposing allowed film to still work out, if you knew how to make it. You could shoot with ISO 200 settings on ISO 100 film, and push the processing for ISO 200, and save the shots. There were several techniques for saving the shot, including push processing, pull processing, and pre-exposing. When shooting RAW format, most conversion applications, like Canon’s DPP, can be used to correct an exposure by up to 2 stops either direction. Using the exposure setting that way, though, you affect the entire image, not just certain areas. Using most image editing programs, you can dodge or burn areas to meet your needs, as well adjust your curves and levels. In fact, most applications have the common dark room tools, which is why they refer to them as a digital dark room.

Rather than discuss those choices at this time, we’ll address pre-exposure. I chose this topic, as most image applications don’t have a feature that allows that directly. Rather, you have to use a round about method to obtain similar results, and that’s what we’ll discuss today. Pre-exposing film allowed the photographer to bring out detail in deep shadows by adjusting them to higher levels or zones. By pre-exposing a hot, then shooting over that pre-exposed frame, light intensity could be raised. If you wish to bring out detail in zone 2 shadows, you could pre-expose for zone 1 or 2, then shoot for a correct overall exposure and get those elusive shadow features. You’d need to take a gray card or translucent plastic/glass, meter it exactly along your image axis, and set your exposure accordingly, then shoot the scene. You could push, pull, or otherwise develop according to your plans, and print the same. We’ll be simulating this technique. I’m going to use this image as an example.

Hohenfel Volks: Passau skyline, pre-exposure original
ISO 100, f/5.6, 1/500, 55mm
The Passau Skyline!

First, select your image, and open it in your editor of choice. Whether you use Photoshop, GIMP, or Paintshop Pro, the basic are the same, but your application needs to support layers. Once your image is open, make a new layer, and select your color selection tool. Click on the shadows you wish to open up and increase the details. Before closing, look at the settings or options for that color and increase the values by the desired amount. For this image, I chose the trees in front of the church, which came out to R-7, G-7, B-7, L-7, and doubled them all to 14. This was still in zone 1, digitally speaking, but when combined at the end, allowed for a slight bump in the shadow detail.

With that being done and applied, select your bucket too and flood fill the new layer with that color. You should have something solid, in your selected color or tone. Set you blend mode to screen, and watch the magic start. All your levels will increase except the brightest areas. You will notice a decrease in contrast as well.

Decrease the new layer’s opacity until you have a set of results that are satisfactory. Now, select levels adjustment, and crush in the curves ever so slightly. This will increase your contrast, without removing too much detail from your shadows. You can apply a curves adjustment and a clarify adjustment if you desire. Now you should see something that is pleasing to your eye, and has more detail in the shadows.

In the days of film, you shot for the shadows, to preserve detail. This often meant slightly overexposing your shot, and printing to retain the detail in the highlights. By pre-exposing your film, you had a way to create more detail without giving any up on the other end. Because exposure was cumulative on multiple shots at the same frame, you could add light as needed. The reason for dark areas benefiting most, was that you added light uniformly across the image at the same level, but your exposure of the image was not uniform. Using just quick numbers to demonstrate, at level 2, when you add 2 units you double the level. At your highlights with say 100 units, you add 2 units and the results are almost unnoticeable due to the ratios. This works in digital the same way, when you select screen mode, you only lighten values lower then your selected pre-exposure layer. Although there is some small effect at slightly higher levels, it is less drastic. By varying the opacity of the layer, you can control the effect even more. Adding masking to allow only certain areas to be painted in gives you complete control!

Here is my final image. Not a large change, but enough to bring out some of the detail within the trees. This works best with images without a large amount of bright spots or too much contrast, but this image was useful. This shows you what a little bit of old time darkroom work on today’s technology can accomplish.

Hohenfel Volks: Passau skyline, pre-exposure finished
Same as above, with pre-exposure.

Well, that’s it for today. Keep shooting, keep seeing the light, and keep your love of our art going with frequent sessions behind the lens! Don’t forget to vote and to get your works in for this week’s theme!

Don’t forget to post any of your images you’d like to see here at the Hohenfels Volks Facebook page. Of course, commenting on both Facebook and here is always appreciated, too! Don't forget, we're on Google+, too!

Monday, February 6, 2012

Craftsmanship in Photography

Greetings, volks. Welcome to Hohenfels Volks, THE place for our place! I hope you’re staying warm; I know it’s hard for me to keep warm!

Today we’re going to start with a quote from Ansel Adams. I frequently reference him, as you may have noticed. He wrote in the introduction to his book “The Negative,” “…it is false to suggest that there are shortcuts and quick formulas for success in photography.” I for one am starting to see why he felt that way.

The recent trend in photography, as in all things modern, seems to be toward the easier, simpler, and more automated. Without any doubt, I can safely say that automation, simplicity, and ease will allow you to take some decent snapshots. Take snapshots… not make photographs. Further, with even less doubt, I can say that, like government handouts and welfare, they create an unnecessary dependence, which will hinder your development into a maker of photographs.

Ansel Adams believed in knowing your craft, knowing how to make photographs. It was simple, really, to match your print to your vision you had to know how your camera, negative, and print worked together to get the right combination. He also believed that creativity and freedom in the pursuit of your vision were only available if you knew how to make your shot match your vision. Great photos can happen because of a little knowledge and some trial and learning. As you try various techniques and settings, you learn what works and what doesn’t. Don’t be afraid to try manual mode, even if your image is less than you wanted, it can teach you what settings didn’t work. Digital gives the instant ability to know if something worked or not, we should take advantage of it. The sad thing is, too many folks become totally dependent on the camera making the rules, and thereby limit their abilities.

Things we often view at first as less than we hoped for, can become a treasured shot when viewed free from the disappointment of not making what we’d visualized. Remember that, and keep shooting. Strive for better with each shot, but enjoy them all as they happen. You’ll find things about your work that you may have never noticed before.

Enough of the soapbox! Let’s move on to the new theme. This week’s theme is I'm SO Lonely! (If You Weren't So Isolated!) by a vote of 2 to 1. As last week’s theme dealt with the positive side of isolation and solitude, it seems fitting that you have chosen this theme. Show us the negative side of solitude, the isolation of your subject. Perhaps it’s the despairing soul trapped in a lonely joyless rut, maybe it’s the widow, who mourning, longs to feel again the warmth of her husband’s breath. You could show how being alone weakens, rather than strengthens, the whole, by isolating one from a group. Express the isolation, the negative side of solitude, in your images and get them submitted by next Monday night.

Tomorrow we’re hoping to do another Around Hohenfels if things work out. Look for it, and if we end up with something else, I’ll try to be more interesting!

Don’t forget to post any of your images you’d like to see here at the Hohenfels Volks Facebook page. Of course, commenting on both Facebook and here is always appreciated, too! Don't forget, we're on Google+, too!

Friday, February 3, 2012

Home On the (Tonal) Range

Greetings, volks. Welcome to Hohenfels Volks, THE place for our place! I hope you’re staying warm; this cold can be a killer.

Today we’re introducing a new concept. We’re going to discuss tonal range. Usually tonal range is a term used in monochrome photography. But it can also be used in color, with a slightly expanded meaning.

Tonal range in B&W photography refers to the range from darkest black to whitest white. This is a vague definition; so let’s get more detailed here.

First, tonal range is limited by 3 factors. The first is your camera or film, the second is your monitor in digital photography, and the third is the printer or paper selected.

A film or image sensor can have wide tonal range, allowing for many levels between zone transitions. Though it has a wide range, it may not be capable of recording more than a few ranges at a time, which gives it more contrast. If you remember, there are 11 zones and that we generally want to get the bulk of our image in zones 2 through 8, with our true blacks in zone 0 and whites in zone 10. Zones 0 and 10 have no tone or texture; therefore convey no usable information to the image. This means we should be placing our extremes in zones 1 and 9 if we want any kind of detail. Tonal range in this context allows for more gradual shift between the extremes of each zone. As in the image “A Shot in the Dark,” narrow tonal range can increase the visual impact of an image immensely. Wider tonal range can be flat and lacking in impact if consideration isn’t given to the ranges you want to emphasize. You can use a wide tonal range, while limiting most of your imagery to one end of that range for more impact.

In film, light is recorded on a strip of film and silver halides. Where the light hits, the silver halides are concentrated, creating a thicker negative. This is referred to as your density. The greater your density, the greater the light recorded. A film's tonal range often corresponds to its density. A wide range of densities in a shot means a wider tonal range.

Your monitor also has a limited tonal range. The more modern LCDs have an incredible range, perhaps more than your camera or film. This will have an impact on your presentation and editing when using different monitors. This is part of the reason for calibrations for monitors and printers. We won’t discuss that here beyond this.

Your printer and paper also are limiting factors. As with monitors, papers and in digital, inks have different tonal ranges. One type of paper may have a wider tonal range and be capable of allowing the entire range of your image to be printed beautifully. Another type may not. The same with printers and inks.

In color photography, tonal range refers to all the above, but is applied to each of the colors, Red, Green, and Blue. Each color may have a different tonal range, in each of the devices we’ve discussed. That’s why on most newer cameras, your histogram can either show RGB, luminance, or both. This allows you to see each color in relation to the other colors.

When displaying your final image, you choose your presentation format- monitor, CRT, print, and so on. Giving the output and its tonal range the right consideration can go a long way to creating what you visualize and making your vision a reality. When you wish to print an image out, it’s best to have a test print from the target printer to ensure your monitor matches, then your image can be edited to match and you’ll get a great print. The same goes with film and silver based paper printing. Match your film to the paper that will achieve the results you desire and your photos will be better for it.

Later, we’ll look at more about this subject. In future posts, we’ll examining individual influences on, and aspects of, your tonal range. I’m looking forward to you joining us on our journey through photography.

I hope you’ll be posting your photos for this week’s theme, and get your vote tallied for next week’s theme!

Don’t forget to post any of your images you’d like to see here at the Hohenfels Volks Facebook page. Of course, commenting on both Facebook and here is always appreciated, too! Don't foget, we're on Google+, too!

Thursday, February 2, 2012

Reviewing Composition and Inspiration

Greetings, volks. Welcome to Hohenfels Volks, THE place for our place! W-w-w-w-welcome to our review of composition and inspiration.

Today’s review of these things will show how they can work together, as well as refresh us on the topic.

Let’s start with some of the basics of composition. Remember the rule of thirds? Well, there are other guidelines, like the Golden Triangle, and Golden Mean, or Spiral. When we look at 35mm film, and most of our digital sensors, we find that they are 1.5 to 1 in their aspect ratio. The golden Ratio is 1.618 to 1. The dimensions of 35mm are 36mmx24mm. Oskar Barnack of Leitz chose this. By doubling the size of 24mmx18mm motion picture film, he created 35mm film as we know it. Using his film, Leitz created a camera to use it, but production didn’t begin until around 1924. Thus was born the Leica, Leitz Camera. Since his creation of the format for photography, the dimensions have been standard.

By splitting each dimension into thirds, and using those junctions as focal points for your center of interest, you can create nice compositions. This is the rule of thirds. By taking a line from one corner of the frame toward the center, and another extending from corner to corner, you create 3 triangles and can use those to position your center of interest. You can also use them to give weight to your primary subject. By following these rules to a certain point, composing your image becomes a visual exercise in balance, detail, and subject weight. It also allows your to create some interesting photos that will impress even the most die hard see and snapper. These rules are not set in stone, in fact, they are quite flexible. For instance, when shooting something that has converging parallels, it may be best to center the parallels at the bottom center and have them run straight through the frame. The secret to breaking the rules and being successful is knowing why it worked and why you did it.

Some other tips for your composition include not making your horizon centered in your image. It makes for a static scene. Diagonals make a scene dynamic, while curves add grace and elegance. Straight lines across or from top to bottom are very static, having almost no “flow.” Circles are a great tool to lead the viewer into and through the image. Remember that leading lines don’t have to be lines or shapes, but the feeling or implication of lines or shapes. They lead your viewer through your scene, and increase interest in your subject.

Now on to inspiration. What inspires you? What is your muse, your source, the wellspring from which you draw photographic inspiration? Almost all of us are inspired by more than 1 thing. There are times my daughter is my muse, and others; it may be a shaft of light or my wife. I find inspiration in the strangest places and often at strange times.

You don’t have to go looking for inspiration, either. It often strikes unexpectedly. Reading a blog post the other day, I found myself hit by the desire to try something similar to what the author had done. When you get an inspiration for a shot, start out visualizing your composition and lighting. By visualizing those 2 things, you can get a stronger image that will hold the viewer longer. By being open to inspiration, you can get more shots that you like. Take the time to look around you, not for inspiration, but to see the light, the colors, the textures, and the patterns. Seeing them may start the cogs turning toward something that inspires you. Often just looking at something my daughter has inspires a shot of her using it! Her checked coat may make me want to catch the pattern in some way that it brings out a feature of her. Don’t look for inspiration in trying to put others down, but look for it in things that make you feel good, and you’ll usually find it without looking too hard.

For both of today’s review subjects, you can find a wealth of information, and inspiration, on the net. Check out our links and you’ll be surprised at what you find. Look at the Your Works section, and check out the works of our followers, you’ll find something there that appeals to you!

After our 2 posts reviewing some of the basics, you should be ready to get some shots for this week’s theme, Solitude. Look around and find something that inspires your creativity, and visualize your light and composition. Knowing what you want to show, you can get your exposure right, and have a great shot. I hope you’ll be posting yours this week, and get your vote tallied for next week’s theme!

Don’t forget to post any of your images you’d like to see here at the Hohenfels Volks Facebook page. Of course, commenting on both Facebook and here is always appreciated, too!

Wednesday, February 1, 2012

Reviewing the Basics

Greetings, volks. Welcome to Hohenfels Volks, THE place for our place! Brrr. That’s our word of the day!

Today we’re going to review some of the basics of photography and exposure. This can all be found on our Introduction to Photography page. We should all have a good idea of this stuff, but it always helps to refresh the cup, so to speak.

First, we’ll address our exposure triangle. The triangle consists of 1- ISO or film speed, 2- shutter speed, and 3- aperture. To change exposure, you change any side of the triangle. To keep the same exposure, you have to change at least 2 sides. For instance, we set up on a sunny day at ISO 100, f/16, and 1/100. According to the “sunny 16 rule,” we’re good to go. But we want less DOF, so we need to increase our aperture. We go to f/4 to give us a shallow focus. If we don’t change another side of our triangle, we overexpose and create a mess. We have a 4-stop increase in the amount of light coming in, so we need a four-stop increase in shutter speed or 4-stop decrease in ISO. Since we can’t bring our ISO lower, we need to change our shutter speed to 1/1600. At 1/1600 at f/4, that gives us the same as 1/100 at f/16. If we want to increase our exposure, we can change any 1 side and either decrease our exposure or increase it depending on our new settings. For instance we want to increase our exposure on ISO 100, f/16, 1/100 2 stops, so increasing our aperture to f/8, decreasing our shutter speed to 1/25, or increasing our ISO to 400 will do just that. Remember, when we meter something, or a scene, the meter gives us the exposure for 18% gray, which is zone 5. Knowing this allows us to place the item we meter into different zones or exposure levels.

Next up, we’ll look quickly at depth of field, or DOF. This is a product of our focal length and aperture. The longer our lens’s focal length is, the shallower our DOF. The wider our aperture is, the shallower our DOF. This can be a good way to remove or minimize distractions. A 100mm lens at f/16 has about the same DOF as a 50mm lens at f/4. Focused at 10 feet, both give a DOF running from about 9.17 to 11 feet. Seeing that, you can deduce that a shorter lens has a wider DOF.

Remember, these 2 topics we’ve reviewed go together. By adjusting your aperture for a shallower DOF, you’ll have to change something else to maintain your exposure. If you wish to move into a new zone, you’ll change your DOF if you use your aperture to move zones.

We’ll review composition and inspiration in our next talk. Remember to vote and get your pics in early. I hope you’ll all participate in this week’s theme, solitude. We’re aiming for more votes for our theme, so get involved and let’s enjoy the journey together!

Don’t forget to post any of your images you’d like to see here at the Hohenfels Volks Facebook page. Of course, commenting on both Facebook and here is always appreciated, too! Don't foget, we're on Google+, too!